Dutch Boy® Wood Stain 6800

Dutch Boy® Wood Stain protects and highlights wood grain to bring out the natural beauty of interior wood works such as cabinets, furniture, and paneling.

Share :

Share on Facebook Share on Twitter Share on Google Plus

PACKAGING: 
1-Liter and 4-Liters

FINISH:
Flat

APPLICATION:
Thoroughly shake can before using. Apply by brush.

PRACTICAL COVERAGE:
25 to 30 square meters

DRY THROUGH:
To touch: 2 hours
To recoat: 12 hours

THINNING SOLVENT: 
Dutch Boy® Paint Thinner 6000

TINTING: 
Do not tint.

CLEAN UP  SOLVENT: 
Dutch Boy® Paint Thinner 6000

AVAILABLE COLORS:
6800 Wood Stain Walnut
6805 Wood Stain Maple
6807 Wood Stain Mahogany
6808 Wood Stain Oak

SURFACE PREPARATION: 
Sand surface until the wooden surface is smooth to the touch and no slivers or rough edges remain. Hammer all nails deep enough to apply putty. Open grain wood can be filled with a wood paste filler using a putty knife. The filler may be tinted with stain to match the desired shade. Allow the filler to set for 15 minutes then rub off excess across the grain. Let it dry overnight.

Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by wire brushing, scraping, or by using a paint and varnish remover.

PAINTING SCHEDULE:
Using a brush, apply Dutch Boy® Wood Stain direct to bare wood without primers or undercoats. Wipe over once along the grain to remove excess material and to smooth out any runs. Leave each coat for about 4 to 8 hours or until totally dry. Recoat for a darker shade.

1st coat
Dutch Boy® Wood Stain

Intermediate coat
Dutch Boy® Sanding Sealer Lacquer 2100

Topcoat
Clear Gloss Lacquer 2700
Dead Flat Lacquer 2500
Water White Gloss Lacquer 2701